Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)
Sublimation Snow Globe Glass Cans (8mm Pre-drilled)

Sublimation Snow Globe Glass Cans (8mm Pre-drilled)

Regular price $7.75 Sale price$6.95 Save 10%
/
Shipping calculated at checkout.

Enjoy Flat Rate Shipping on Orders $50+ 🚚

Style
  • In stock, ready to ship
  • Inventory on the way


    Unleash your imagination and take a chance with these clear glass snow globe tumblers! Pack the walls with your favorite mixture and create your own dazzling snow globe - the possibilities are yours for the taking! Crafted with precision, these tumblers boast a cleverly placed 8mm opening at the base, allowing you to infuse larger clay slices or glitter into the walls for an extra dose of creativity! Each tumbler is accompanied by an 8.5mm silicone plug.

    You must sublimate these glass cans first before you put the liquid mixture into the walls. Once you sublimated the glass can, you can proceed with filling the walls with the liquid mixture.

    What's included:
    8.5mm silicone plug, bamboo lid and clear plastic straw as pictured.

    Details:

    • Pre-drilled glass cans with approx. 8mm opening at the base.
    • Double-walled.
    • Gloss finish.
    • Straight body for easy image transfer.
    • Glass straws can be purchase here.

    Instructions:

    Material Glass with sublimation coating
    Print Size approx.

    16oz: 9 ¾" (W) x 5 ½" (H)
    25oz: 9 ½" (W) x 8 " (H)

    Temp. 385F - 400F
    Time

    - 8 minutes (Oven)
    - 60 seconds (Tumbler Press)

    Pressure Light
    Note: Due to the wide varieties in sublimation equipment used (paper, ink, heat press, oven, etc.), you may need to adjust the pressure, temperature and/or time slightly.

    How to:
    • These glass cans must be sublimated empty without the liquid mixture inside the glass walls.
    • Print image in reverse, slightly larger than the tumbler.
    • Tape the transfer tightly onto the tumbler.
    • If using a press: cover with butcher paper to prevent ink bleeding.
    • If using an oven: cover with shrink wrap for extra pressure. Make sure the shrink wrap is not touching the glass directly as it may stuck permanently to the glass once it cools down.
    • Press according to the above temperature and time.
    • After pressing remove the tumbler from oven/heat press. Wear gloves as tumbler will be very hot.
    • Let it cool on a table and peel the design once it's cooled down.
    • Once the glass can cooled down, start filling the walls with the liquid mixture.
    • Seal the bottom opening with quick cure epoxy and UV light.
    • Sit back and enjoy your beautiful snow globe tumbler!


    How to care:
    - Do not soak.
    - Handwash only with soft sponge and mild dishsoap. Do not use abrasive materials.
    - Do not scrub the outer wall of the glass can.
    - Towel dry the bamboo lid once you washed them, to prevent mold growing.

    Visit our Etsy store for tumbler designs. Use code EASYTUMBLERS to get 20% off on all digital designs at our Etsy store.


    Recently viewed