How To
Care Instructions:
Handwash tumblers with cold/warm water with a sponge. Do not use abrasive material. Do not put in microwave.
Sizes of the tumblers are posted on each listings.
How to sublimate blank tumblers:
Wipe tumblers with lint free cloth and alcohol before you do any personalization to make sure it is clean from any debris or lint.
Instructions for using a convection oven and shrink wrap:
Preheat oven to 375°F. Lower temp to 360°F for all Shimmer tumblers.
1. Remove all plastic/rubber parts and lid
2. Cut out design and affix to tumbler using heat tape
3. Place in shrink wrap bag
4. Use a heat gun to shrink bag to tumbler
5. Place in oven for 6 minutes at 375°F (360°F for Shimmer tumblers), turning half time
6. Remove from oven (wear heat resistant gloves, tumbler will be hot!)
7. Remove shrink wrap and image from tumbler (hot or cold peel)
Instruction using tumbler press:
Pre-heat the press to 375°F. Lower temp to 350°F for all Shimmer tumblers.
1. Remove all plastic/rubber parts and lid
2. Cut out design and affix to tumbler using heat tape
3. Cover with protective paper (butcher paper)
4. Place tumbler in mug press and close the heating element
5. Press at 375°F (350°F for Shimmer tumblers) for 1 minute 15 seconds
6. Rotate tumbler and press for an additional 1 minute 15 seconds
7. Remove the tumbler from the press (wear heat resistant gloves, tumbler will be hot!)
8. Remove the paper and image from tumbler (hot or cold peel)
Note:
Not all oven/press are the same. You may need to adjust the temperature and/or time slightly.
If you have any questions, please contact us at contact@easytumblers.com.
Happy subbing!!